2 incepting card accept the data sent by collecting card , it has every point dynamic color compensate circuit 2接收卡:接收采集卡發送過來的數據,含逐點動態色彩補償電路。
Low df , stable capacitance , the linear capactance change with temperature , designed from all series for oscillation and temperature compensate compensate circuit 損耗低,容量穩定性高,電容量變化與溫度呈線性關系.多種溫度系數,適用于諧振回路及溫度補償效應的電路
Controlling system is composed of drive circuit , locking memory , shift register . temperature compensating circuit and drive power circuit are also needed 控制系統是由驅動電路、鎖存器、移位寄存器等組成,此外還需要溫度補償電路和驅動電源電路,本文對控制系統進行了詳細的論述。
Low df , stable capacitance , the linear capacitance change with temperature . designed from all series tc series tc suits for oscillation and temperature compensate compensate circuit 損耗低、容量穩定性高,電容量變化與溫度呈線性關系。多種溫度系數,適用于諧振回路及溫度補償效應的電路。
The programable unit of inspac is used first to work out the frequency compensating circuit adapted itself , the frequency band is extended . the application range of the manual sensor is extended 首次使用isppac可編程器件制作自適應頻率補償電路,展寬了頻帶,拓寬了手持式傳感器的應用范圍。
The hardware control system based on tms320f240 is designed , which includes sampling circuit , protective circuit , phase - compensated circuit , keyboard & display circuit and so on 接著設計以tms320f240為控制核心的硬件控制平臺,包括了采樣電路、保護電路、相位補償電路、鍵盤顯示電路等外圍電路。
The hardware control system based on tms320lf2407a is designed , which includes sampling circuit , protective circuit , phase - compensated circuit , driving circuit and so on . the program of system is compiled 設計以tms320lf2407a為控制核心的硬件控制平臺,包括了采樣電路、保護電路、相位補償電路、驅動等外圍電路,在此基礎上編制了程序軟件。
The combined motor vibration sensor which is held manually with double charge amplifier placed inside and with frequency compensating circuit is designed based on the existed press - electricity accelerator of vibration and the measuring vibration system of charge amplifier in the paper 本文在現有振動壓電式加速度計、電荷放大器測振系統的基礎上,設計了手持式內置微型雙電荷放大器和頻率補償電路的一體化發動機振動傳感器。
Abstract : a bandgap voltage reference is presented with a piecewise - linear compensating circuit in order to reduce the temperature coefficient . the basic principle is to divide the whole operating temperature range into some sub - ranges . at different temperature sub - ranges the bandgap reference can be compensated by different linear functions . since the temperature sub - range is much narrower than the whole range , the compensation error can be reduced significantly . theoretically , the precision can be improved unlimitedly if the sub - ranges are narrow enough . in the given example , with only three temperature sub - ranges , the temperature coefficient of a conventional bandgap reference drops from 1 . 5 10 - 5 / to 2 10 - 6 / over the - 40 to 120 temperature range 文摘:提出了一種采用分段線性補償?shù)姆椒▉?lái)實現高精度帶隙基準,其基本原理是將整個溫度區間分為若干個子區間,在不同子區間上采用不同線性補償函數達到最佳補償.由于溫度區間縮小,補償誤差也隨之減小,從而在整個工作溫度間上的補償誤差也縮小.理論上,只要溫度子區間取得足夠小,就可以達到任意精度.示例中將- 40 120的溫度區間僅分為三個子區間,平均溫度系數就從1 . 5 10 - 5 /減小到2 10 - 6 /